charts/template/CHART_NAME

%%CHART_NAME%%

%%DESCRIPTION%% (check existing examples)

TL;DR

helm install my-release oci://registry-1.docker.io/bitnamicharts/%%CHART_NAME%%

Looking to use %%CHART_NAME%% in production? Try VMware Tanzu Application Catalog, the commercial edition of the Bitnami catalog.

Introduction

%%INTRODUCTION%% (check existing examples)

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure
• ReadWriteMany volumes for deployment scaling

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/%%CHART_NAME%%

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys %%CHART_NAME%% on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip: List all releases using helm list

Configuration and installation details

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

External database support

%%IF NEEDED%%

You may want to have %%CHART_NAME%% connect to an external database rather than installing one inside your cluster. Typical reasons for this are to use a managed database service, or to share a common database server for all your applications. To achieve this, the chart allows you to specify credentials for an external database with the externalDatabase parameter. You should also disable the MariaDB installation with the mariadb.enabled option. Here is an example:

mariadb.enabled=false
externalDatabase.host=myexternalhost
externalDatabase.user=myuser
externalDatabase.password=mypassword
externalDatabase.database=mydatabase
externalDatabase.port=3306

Ingress

%%IF NEEDED%%

This chart provides support for Ingress resources. If you have an ingress controller installed on your cluster, such as nginx-ingress-controller or contour you can utilize the ingress controller to serve your application.To enable Ingress integration, set ingress.enabled to true.

The most common scenario is to have one host name mapped to the deployment. In this case, the ingress.hostname property can be used to set the host name. The ingress.tls parameter can be used to add the TLS configuration for this host.

However, it is also possible to have more than one host. To facilitate this, the ingress.extraHosts parameter (if available) can be set with the host names specified as an array. The ingress.extraTLS parameter (if available) can also be used to add the TLS configuration for extra hosts.

NOTE: For each host specified in the ingress.extraHosts parameter, it is necessary to set a name, path, and any annotations that the Ingress controller should know about. Not all annotations are supported by all Ingress controllers, but this annotation reference document lists the annotations supported by many popular Ingress controllers.

Adding the TLS parameter (where available) will cause the chart to generate HTTPS URLs, and the application will be available on port 443. The actual TLS secrets do not have to be generated by this chart. However, if TLS is enabled, the Ingress record will not work until the TLS secret exists.

Learn more about Ingress controllers.

Securing traffic using TLS

TLS support can be enabled in the chart by specifying the tls. parameters while creating a release. The following parameters should be configured to properly enable the TLS support in the cluster:

• tls.enabled: Enable TLS support. Defaults to false
• tls.existingSecret: Name of the secret that contains the certificates. No defaults.
• tls.certFilename: Certificate filename. No defaults.
• tls.certKeyFilename: Certificate key filename. No defaults.
• tls.certCAFilename: CA Certificate filename. No defaults.

For example:

First, create the secret with the certificates files:

kubectl create secret generic certificates-tls-secret --from-file=./cert.pem --from-file=./cert.key --from-file=./ca.pem

Then, use the following parameters:

tls.enabled="true"
tls.existingSecret="certificates-tls-secret"
tls.certFilename="cert.pem"
tls.certKeyFilename="cert.key"
tls.certCAFilename="ca.pem"

%%OTHER_SECTIONS%%

Additional environment variables

In case you want to add extra environment variables (useful for advanced operations like custom init scripts), you can use the extraEnvVars property.

%%CHART_NAME%%:
  extraEnvVars:
    - name: LOG_LEVEL
      value: error

Alternatively, you can use a ConfigMap or a Secret with the environment variables. To do so, use the extraEnvVarsCM or the extraEnvVarsSecret values.

Sidecars

If additional containers are needed in the same pod as %%CHART_NAME%% (such as additional metrics or logging exporters), they can be defined using the sidecars parameter.

sidecars:
- name: your-image-name
  image: your-image
  imagePullPolicy: Always
  ports:
  - name: portname
    containerPort: 1234

If these sidecars export extra ports, extra port definitions can be added using the service.extraPorts parameter (where available), as shown in the example below:

service:
  extraPorts:
  - name: extraPort
    port: 11311
    targetPort: 11311

NOTE: This Helm chart already includes sidecar containers for the Prometheus exporters (where applicable). These can be activated by adding the --enable-metrics=true parameter at deployment time. The sidecars parameter should therefore only be used for any extra sidecar containers.

If additional init containers are needed in the same pod, they can be defined using the initContainers parameter. Here is an example:

initContainers:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
      - name: portname
        containerPort: 1234

Learn more about sidecar containers and init containers.

Pod affinity

This chart allows you to set your custom affinity using the affinity parameter. Find more information about Pod affinity in the kubernetes documentation.

As an alternative, use one of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the podAffinityPreset, podAntiAffinityPreset, or nodeAffinityPreset parameters.

Prometheus metrics

This chart can be integrated with Prometheus by setting metrics.enabled to true. %% EXPLAIN INTEGRATION. CHECK OTHER EXAMPLES %%. It will have the necessary annotations to be automatically scraped by Prometheus.

Prometheus requirements

It is necessary to have a working installation of Prometheus or Prometheus Operator for the integration to work. Install the Bitnami Prometheus helm chart or the Bitnami Kube Prometheus helm chart to easily have a working Prometheus in your cluster.

Integration with Prometheus Operator

The chart can deploy ServiceMonitor objects for integration with Prometheus Operator installations. To do so, set the value metrics.serviceMonitor.enabled=true. Ensure that the Prometheus Operator CustomResourceDefinitions are installed in the cluster or it will fail with the following error:

no matches for kind "ServiceMonitor" in version "monitoring.coreos.com/v1"

Install the Bitnami Kube Prometheus helm chart for having the necessary CRDs and the Prometheus Operator.

Backup and restore

To back up and restore Helm chart deployments on Kubernetes, you need to back up the persistent volumes from the source deployment and attach them to a new deployment using Velero, a Kubernetes backup/restore tool. Find the instructions for using Velero in this guide.

Persistence

The Bitnami %%CHART_NAME%% image stores the %%CHART_NAME%% data and configurations at the /bitnami path of the container. Persistent Volume Claims are used to keep the data across deployments.

If you encounter errors when working with persistent volumes, refer to our troubleshooting guide for persistent volumes.

Parameters

See https://github.com/bitnami/readme-generator-for-helm to create the table

The above parameters map to the env variables defined in bitnami/%%CHART_NAME%%. For more information please refer to the bitnami/%%CHART_NAME%% image documentation.

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
  --set %%CHART_NAME%%Username=admin \
  --set %%CHART_NAME%%Password=password \
  --set mariadb.auth.rootPassword=secretpassword \
    oci://REGISTRY_NAME/REPOSITORY_NAME/%%CHART_NAME%%

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the %%CHART_NAME%% administrator account username and password to admin and password respectively. Additionally, it sets the MariaDB root user password to secretpassword.

NOTE: Once this chart is deployed, it is not possible to change the application's access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application's built-in administrative tools if available.

Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/%%CHART_NAME%%

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami's Helm charts in this troubleshooting guide.

License

Copyright © 2025 Broadcom. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.